Tag Archives: color

Emeralds

Emeralds are a green crystal of beryllium-aluminum silicate. The chemical formula is Be3Al2(SiO3). They are hexagonal prismatic crystal with a hardness of 7 1/2 to 8 on the Mohs scale. They are not tough stones and may be broken easily by mishandling or the use of severe chemicals or ultrasonic cleaners. If you own an emerald, be careful of it. Don’t wear it during sports. Don’t have a jeweler clean it in an ultrasonic cleaner as it may shatter.

Emeralds also break under applications of heat and should never be in a ring that is soldered. Under ultraviolet light they may fluoresceslightly, orangish red to red, or they may be inert.

Emeralds come from a number of sources. The best come from Colombia. These are the purest colored and generally the finest stones. The emeralds from Brazil are lighter, have more inclusions and are generally smaller than from other areas. Zambia, Africa, produces some bluish stones and some near-Colombian stones. Zimbabwe is home to a particular emerald known as the sandawana emerald which is generally small with a rich green color. Anything over 1/3 carat is rare.

South Africa produces some low-quality emeralds. Tanzania produces a few very good quality emeralds. Pakistan has just discovered some high-quality emeralds. Afghanistan tends to produce flawed but good colored emeralds. USSR does produce emeralds but doesn’t like to let them out of the country. Australia produces some dubious quality emeralds and North Carolina a few gems. Austria and India occasionally produce emeralds.

Emeralds are not unusual as the word emerald simply indicates an extremely nice version of a fairly common stone known as beryl. It is possible to buy something legitimately called an emerald for about $5 a carat. Obviously this is full of flaws, not transparent and so impure in color it looks more like jade than an emerald. They would never be sold in a jewelry store but emeralds do sell on TV and some of the better magazines for $5 per carat.

Gem quality emeralds range anywhere from $400 to $18,000 a carat, depending upon their quality. As the stones get larger, they become increasingly rare and sell for considerably more money.

Color is a critical factor in emeralds and constitutes about half of the stone’s value (clarity 30% and cut 20%).

Hue describes the primary color and any other colors in the stone. Most emeralds are green hued with a bluish hue also visible, especially the better Colombian-type emeralds.

Tone is the depth or darkness of the color as perceived by the eye.

Saturation is the amount of hue present in any given color.

Depending upon where the emeralds come from, they can exhibit a wide range of color; i.e., Brazilian emeralds are usually lighter toned and less saturated than their Colombian cousins.

The green in the emerald is caused by trace elements of chromium and/or bandium. If the color is very light green, the stone is more correctly referred to as green beryl, not emerald.

Emeralds are often oiled to help their appearance. Normally an uncolored oil such as Merck cedarwood oil is used. The stone may soak in the oil for several days and will actually take the oil in somewhat, helping bring out the color and “wedding” on some of the dry inclusions, making the stone look better.

If one finds an emerald that is mild in color or has a grayish hue, it is a good bet to soak it in oil a couple days and it may regain its green color, not to mention its value.

A more unscrupulous “improvement” is to use dye or oil with color in it. It is possible to influence the color of a stone by having it soak up colored oil.

Other problems with buying emeralds are the fact that there are a number of stones that look like emeralds and overlap colors. Tsavorite, a garnet found in Kenya and Tanzania, looks quite a bit like emerald and has a pure green hue, although it tends to be a little bit more yellowish and never has the blue hue of emerald.

Chrome tourmaline is another stone that looks much like an emerald with a moderately strong green color. Another emerald look-alike comes from Africa and is called chrome diopside. All these stones can, and are, sold as emeralds to the unwary.

Different emeralds from different areas tend to have individually shaped inclusions; i.e., slight pyrite inclusions are typical of emeralds from Colombia although they can be seen in stones from other sources.

A three phase inclusion that shows up under a 1 Ox or stronger microscope, which has a distinctly liquid area, a gas bubble in a solid square rock crystal, salt Iying superimposed on each other inside a jagged edged cavity, is typical of emeralds from Colombia and proves their natural origin.

Tropiche emeralds from Colombia sometime exhibit six fine radiating arms of black carbon inclusions, spoke-like in appearance. Another type of this stone has six arms of emeralds extending from the center of the crystal with a white shaped wedge area in between. When these stones are cut and mounted, they are valuable because of their inclusions.

Emeralds are subject to not only customs duty but market restraints as there is no OSO type organization supporting them. It is possible, if one is smart and has verification equipment, to buy emeralds in other countries, notably South America, and smuggle them to America for profit. Coincidentally, the areas one smuggles emeralds from are the same areas one smuggles cocaine from and these passport stamps tend to yell search me, search me. Some people even go to the trouble of swallowing and then recovering emeralds although obviously, we do not encourage or advise this dangerous practice.

Color rating diamond

The second C used in rating diamonds is color. Diamonds come in literally
every color in the rainbow and while a few specialty colored diamonds are
extremely valuable because of their deep hues and unique color characteristics,
these are the exceptions rather than the rule. In general, the closer a stone
is to possessing no color, that is, to being colorless, the more the stone is
worth.
In order to establish the transparency or lack of color in a diamond, the
loose stone is placed on a pure white background under a white light. There
are special lights sold with adjusted color temperatures for this viewing or
some people prefer to use the soft north sunlight when trying to view the
color of a diamond.
In color rating as in clarity rating, the dazzling brilliance and fire of a
diamond are the viewer’s natural enemy. They will confuse the eye and care
must be exercised to not become jaded or tricked, but rather to view each
characteristic individually and in comparison to other stones or photographs
of stones.
The most accepted color grading system is that again of the GIA. Their system
is judged by using a series of master stones sold by the GIA or their
representatives that establish hues and tints and can be laid side by side
with the stone in question in order to view how “white” the stone really is.
If at all possible, it is certainly worth one’s time to visit a large gem
dealer with the intent or apparent intent of purchasing a goodsized stone and
ask to see a master set and become used to judging the color on several stones
until you have a feel for the concept of whiteness, transparency and hues.
Technology has now produced a practical and inexpensive (comparatively) method
of possessing your own diamond master stones. These stones are available in all
colors D through Z on the GIA scale and are excellent to have on hand to
compare with any other stone you may be considering purchasing in order to
rate the new stone. These stones are color correct because they’re created to
be exactly the color they’re supposed to be.
How can this be cheap? The stones are not diamonds. They’re CZ’s, cubic
zirconia. These CZ stones look like diamonds, act like diamonds, smell like
diamonds and can be matched to a real diamond in order to compare colors with
an extreme degree of accuracy.

There’s also a device known as a color meter which electronically measures the
color or lack of color in a stone. This meter is quite accurate although
fairly hard to come by unless one is a member of the Gemological Institute of
America.
The GIA color rating system has been established using alphabetical
nomenclature. The stones are rated from pure (totally colorless) down through
a sliding scale to yellow, which is the least valuable stone. The GIA color
rating system starts with the letter D and progresses through the alphabet as
shown below to Z, which would be very yellow.

A B C D E F ) Colorless
G H I J ) Near Colorless
K L ) Faint
M ) Yellow-White
N O ) Very Light Yellow
P ) Light Yellow
Q ) Yellow
R S T U ) Light
V ) Yellow to Fancy
W ) Fancy
X Y Z ) Yellow

After the letter Z, indicators are used to suggest the stone is more valuable
because of its hue; i.e., a “fancy” color. As you can see from the above chart,
D, E and F stones are considered completely colorless. G, H, I and J are near
colorless stones and take a lot of practice for the amateur to see any color
at all, while after J the stones begin to pick up a small tint of yellow that
is noticeable to practiced gemologists.
To correctly grade a gemstone, the stone must be loose, not in a setting,
should be on a perfectly white background, should have a white gem quality
temperature light and should be viewed from the rear of the stone. In other
words, the stone should be upside down Iying on its table. It is also
extremely helpful to have stones of known color grades nearby for active
comparison.
Never attempt to judge the color of a diamond when it is set in any kind of
setting, be it earring, ring, or whatever as it is strictly impossible to
judge the color of a mounted stone that is taking on hues and tints from the
mounting itself.
Color is a very important consideration in choosing investment quality
diamonds and, in fact, the differences in large sizes such as one carat and
over from a D to an E color (again these are the top rated stones and are both
considered colorless to the naked eye) can be double the price between these
two grades.